| The masonry comes out from the fireplace
and eventually ends, that is the area I am trying to decorate. As
you can see you only cover part of it that is so the wood is not too
close to the heat of your fire.
What I need to know... 1)First what is the distance (in inches) from one end of the fire hole to the other which is marked "width" in the diagram. Also the height of the hole (in inches) marked with the letter "C". Then... 2)I need to know what the distance from the fireplace hole out to the end of the masonry which is marked "b" on the diagram, take note that that has to be done on both sides of the opening. Finally... 3)measure the distance from the opening of the fireplace to the top-edge of the masonry marked "a". However, if you have a Mantle-piece (which is the piece coming out above the fireplace) I will need you to measure from the fireplace opening to the bottom edge of the mantle so that the wood fits under the mantle.
|
 |